Get Started By Contacting us!
Many residents in the New York area still run their houses on oil. While oil can still be a good thing to heat your home on, it is a thing of the past for most residences. However, an oil-to-gas conversion can be a tough decision to make. Thankfully, Joe Sampson’s Plumbing and Heating, LLC is here to help you through this tough process and decision!
Can I Convert My Oil Burner to Natural Gas in Bay Point, NY?
It is possible for you to convert your oil burner to natural gas. However, you would need the proper converter and you would need to have it professionally installed by an expert technician. Additionally, it might not be the best decision for you to convert your oil burner to natural gas. The reason behind this lies in the fact that you should have your furnace or boiler replaced about every 15 years. Depending on the time that you last had it replaced, it might be a better financial decision for you to replace your oil burner with a natural gas one rather than trying to convert it.
Why Do I Have to Replace My Furnace or Boiler Every 15 Years?
Unfortunately, even the highest quality heating systems will eventually wear down and break. If they do not break, they will at the very least not run at their full efficiency, or you might be looking at some costly repairs. According to the United States Department of Energy, it is recommended that you replace your furnace or boiler about every 15 to 30 years depending on the quality, brand, and make of the furnace or boiler. Some furnaces or boilers last a bit longer than others, so it is important that you check with an expert before making a decision like that one. Give us a call at 631-430-5057 and we will be able to help walk through whatever problems you might have!
Should I Repair or Replace My Conversion Burner Oil to Gas in Bay Point, NY?
Generally, the rule of thumb is centered around the age of your furnace or boiler, which is about the 15-year mark. If your furnace or boiler is younger than 15 years, then it is usually best to have it repaired rather than have it replaced. Furthermore, if your furnace or boiler is older than 15 years, then it is usually best to have it replaced rather than repaired. However, this rule of thumb is not the same for every single furnace or boiler. If your furnace or boiler continues to have to be repaired, then it might be time for you to replace it rather than repairing it, even if it is younger than 15 years old. As always, be sure to get in touch with an expert before making any final decisions.
How Much is an Oil to Gas Conversion in the Suffolk County area?
Every home in Suffolk County is different. No one home is going to cost the same for an oil to gas conversion in Bay Point, NY. However, there is a range of prices and oil-based ones are normally much more expensive than natural-gas-based ones. A basic furnace or boiler that runs on natural gas is going to cost about $1,500 to $3,000, depending on a number of different factors. A high-end furnace or boiler that runs on natural gas is going to cost about $3,500 to $5,500. For a basic furnace or boiler that runs on oil, your price range is anywhere between $2,000 and $8,000. For a higher-end furnace or boiler that runs on oil, your price range is even higher: a whopping $4,500 to $10,000. These numbers are listed as a range, so your home could be on the upper end of the lower end of the range. It all depends on a number of different factors, so be sure to speak with one of our experts before you make any final decisions! Our team of well-trained, professional technicians are here to help advise you on any oil to gas conversion questions or decisions you might want to make! Remember that Joe Sampson’s Plumbing and Heating, LLC is here to help! Just give us a call at 631-430-5057 and we will get you in touch with one of our representatives as quickly as we possibly can!
How much does hooking up a conversion burner oil to gas cost in the Suffolk County area?
Obviously, hooking up your conversion burner oil to gas is going to cost a bit. When an oil to gas conversion is done on your house, there are two primary things that occur in the connection process: connections outside the house and connections inside the house. Your local utility company will run a natural gas service line underground from the gas main to your house. From there, they will install a meter. Normally, this service can cost anywhere from $1,000 to $1,500, but it is possible that your local utility company will do it free of charge because they are searching for more customers in your area. Furthermore, it is also possible that you already have a natural gas service line in your neighborhood that connects to your house. In that case, all you will have to do is get in touch with your utility company to turn it on. The second part of this job can be done by your contractor and costs anywhere from $500 to $1,000. This entails connecting and piping the gas from the meter directly to your heating plant.
If any or all of this is a bit confusing to you, then do not worry! Joe Sampson’s Plumbing and Heating, LLC is here to help! Our team of trained professionals can help you with any oil to gas conversions in Bay Point, NY! Our services are unmatched compared to any other company in the Suffolk County area! Our team has years of professional training and plenty of experience on their backs! Be sure to give us a call at 631-430-5057 and we will get you on the line with any number of our expert technicians!
Here are some plumber-related links and associations.
Plumbing responsible for bringing clean water into the home and carrying wastewater out. Plumbing is also used for heating and cooling systems, as well as gas lines. Without a properly functioning plumbing system, a home or building would not be able to function properly.
Yes! If you need help with fixing low water pressure in your home call your local plumber for help.
Plumbing systems ensure that water comes in and out of your house properly. Although plumbing is widely associated with water related services but that is not all that it pertains to- plumbing includes installation and maintenance of heating systems, water boilers, furnaces, washing machines and much more.
No, you should call an appliance repair technician to fix a broken dishwasher unless the problem is associated with the plumbing itself.