We Are known For Our Oil To Gas Conversions!

Get Started By Contacting us!

Oil to Gas Conversions in Glen Cove, NY

Many residents in the Nassau County area rely on oil to heat their homes and water. For decades, oil has always been the best way to heat your home and water. However, with the continuing rising price of oil, many residents in New York have chosen to switch over to natural gas to heat their homes and water. Furthermore, natural gas is a much more efficient way of heating your home and water, and it costs much less than oil. Here are some of the many reasons that homeowners in the Nassau County area are converting from oil to gas:

  • The price of oil compared to natural gas

Over the past few years, oil prices have been, on average, higher than natural gas prices. As a result, many residents in NY are getting oil to gas conversions. Since natural gas is a much cheaper option, homeowners like yourself can end up saving a lot of money in the long run.

  • Protection from any future possible surges in the price of oil

There is no mistaking that the price of oil can be frustrating if you rely on oil to heat your home and water. It can become annoying watching the price of oil surge up for various reasons. However, if you get oil to gas conversion in your home, you will NEVER have to worry about another surge in the price of oil ever again!

  • The increased efficiency of appliances on natural gas

There are a lot of reasons that people in Nassau County switch from oil to gas and making sure that their home is running top-notch is one of them. After an oil to gas conversion, you will see a noticeable difference in the efficiency of the appliances in your home.

  • Helping save the environment

Oil is a much “dirtier” entity to burn because it releases a lot more carbon dioxide into the atmosphere than other things such as natural gas. Many homeowners in Glen Cove, NY make the switch from oil to gas to help the environment, and you can too! 

What is the Process of an Oil to Gas Conversion?

Getting oil to gas conversion in Glen Cove, NY is good for your health, wealth, and the environment! However, the process of converting from oil to gas can get complicated very quickly. Here is a simple four-step process of how we would convert your home from oil to gas:

  • Determine whether you want to use propane or natural gas for your conversion

While many residents in Glen Cove, NY might find it easy to convert from oil to gas, there are plenty that might find it very difficult. Nowadays, many utility companies have natural gas piped directly into your home. While this is certainly the more popular option, there are residents in Glen Cove, NY that end up converting from oil to propane instead. This kind of conversion is much less common, and normally only occurs when there is a big reason that natural gas will not work in your home. Furthermore, propane is a much more dangerous gas because it releases carbon monoxide. This, and many other reasons, are why we recommend converting from oil to natural gas, rather than from oil to propane.

  • Connecting Your Residence to a Line

The second step of an oil to gas conversion is connecting your home to a service line. Most residential neighborhoods in Glen Cove, NY already have a natural gas service line. In some cases, your house might already have a natural gas service line and all you will have to do is call the utility company. However, in many cases, there is no service line installed into your home. Thankfully, here at Joe Sampson’s Plumbing and Heating, LLC, we offer oil to gas conversions in the New York area! Our expert technicians are just a phone call away from helping you figure out if you need an oil to gas conversion! Just give us a call at 631-430-5057 and we will put you on the line with one of our professional experts as soon as possible!

  • Make sure that your pipes can hold natural gas

A lot of old homes in Nassau County might not have the proper piping for natural gas. If your home was already set up to have a natural gas system, then you will not have to worry about this step. However, if your house has never used natural gas to heat your home and water, then you will have to get the proper pipes installed that can hold natural gas. A prime example of this would be if you use oil to heat your home and water. The pipes required for oil are different from the pipes for natural gas. Our expert technicians can help guide you through this complicated process of converting your house to natural gas. Just give us a call at 631-430-5057 and we will help walk you through the entire process!

  • Make to Replace or Convert Old or Previously Used Equipment

Many homeowners in Glen Cove, NY that use oil make the conversion to natural gas because some piece of equipment in their home breaks down. The reason behind this is that new equipment for oil costs significantly more than new equipment for natural gas. Rather than spending the extra money to pay for new oil equipment, it would be a cheaper option to spend money for natural gas conversion. Furthermore, if your oil equipment is still in relatively good condition, then you can also get a conversion kit instead. Rather than replacing all your equipment, a conversion kit can be one of the more practical options.

Joe Sampson's Plumbing and Heating, LLC Offers Expert Oil to Gas Conversion Services!

At Joe Sampson’s Plumbing and Heating, LLC, our expert technicians are trained professionally and have plenty of years of experience on their backs! Our professional experts will be able to help you with any problems that you might run across while converting your home from oil to gas. Just give us a call at 631-430-5057 and we will put you on the line with one of our expert technicians in no time flat!
joesampson-gallery-15
joesampson-gallery-23

Glen Cove is a city in Nassau County, New York, on the North Shore of Long Island. At the United States 2010 census, the city population was 26,964, and 27,166 at the 2019 American Community Survey.

Succeeding cultures of indigenous peoples had lived in the area for thousands of years. At the time of European contact, bands of the Lenape (Delaware) nation inhabited western Long Island, the areas of New York and New Jersey around the harbor, and along the coast through present-day Pennsylvania and Delaware, as well as along the Delaware River. They spoke an Algonquian language. By 1600 the band inhabiting this local area was called the Matinecock after their location.

Glen Cove was used as a port by English migrants from New England and named Moscheto before 1668. On May 24, 1668 Joseph Carpenter of Warwick, Rhode Island purchased about 2,000 acres (8.1 km2) of land to the northwest of the Town of Oyster Bay from the Matinecock. Later in that year, he admitted four residents of Oyster Bay as co-partners in the project: brothers Nathaniel, Daniel, and Robert Coles; and Nicholas Simkins. The five young men named the settlement Musketa Cove Plantation, musketa meaning place of rushes in the Lenape language.

In the 1830s, steamboats started regular service on Long Island Sound between New York City and Musketa Cove, arriving at a point still called The Landing. As Musketa was negatively associated with mosquito, in 1834 residents changed the name to Glen Cove; this was said to be taken from the misheard suggestion of Glencoe, meaning Glencoe, Scotland.

Learn more about Glen Cove.

Additional Links

FAQ

Plumbing responsible for bringing clean water into the home and carrying wastewater out. Plumbing is also used for heating and cooling systems, as well as gas lines. Without a properly functioning plumbing system, a home or building would not be able to function properly.

Yes! If you need help with fixing low water pressure in your home call your local plumber for help.

Plumbing systems ensure that water comes in and out of your house properly. Although plumbing is widely associated with water related services but that is not all that it pertains to- plumbing includes installation and maintenance of heating systems, water boilers, furnaces, washing machines and much more.

No, you should call an appliance repair technician to fix a broken dishwasher unless the problem is associated with the plumbing itself.